Questions & Answers Quaddra XS
Is my Quaddra XS notebook year 2000 compliant?
- Yes.How do I access the BIOS and what are the default factory settings?
- Press the F2 when the Quaddra is booting up - Follow our on-line BIOS sheetHow long does a standard battery last on my Quaddra?
- An Quaddra XS battery lasts around 2hr depending on the use of the machine.How long does the battery take to fully recharge?
- The battery takes about 8hrs to fully recharge with the machine being on, and about 4hrs with the machine being off.How do I know when the main battery is fully charged?
- Check the Icon on Task BarMy battery life is getting shorter, what should I do?
- The problem is caused by re-charging a battery by giving short burst of charge to top-up a battery. As the battery gets older they loose their life and need replacing after about 500 cycles.My modem doesn't connect at 56Kbps, what should I do ?
- It is not necessary that the modems have to connect at 56Kbps that is maximum connection speed and may vary depending on the quality of the telephone line.My modem comes up with error message "no dial tone"
- Follow our Modem Diagnostic informationThe DVD seems to very unstable and jumpy?
- Right click My computer then Properties and then Device ManagerI cannot get my Infrared to work?
- View Our Sorting out IR problems Under Windows 98 documentMy Video display is not working correctly?
- Check your settings and set-up the video driver with theI have no sound coming from my notebook?
- Check the volume control speaker icon on taskbarHow do I get a display on an external monitor?
- Press and hold the Function [Fn] key and at the same time press the [F7] key to toggle between the different displaysDoes the Quaddra XS support SAVE-TO-DISK function during low Battery State?
- Yes, ensure "save to" is set to disk in power section of BiosHow to use the hot key for brightness control adjustment?
- To adjust the display brightness, you must press and HOLD the hot key ([Fn]+[F8] or [Fn]+[F9]) simultaneously and release the hot keys after getting the desired display clarityHow do I get an external mouse to work?
- Plug in a PS/2 mouse with power switched off then boot into windowsMy touch pad occasionally goes out of control, what should I do?
Reload the touch pad driver from the notebook CD supplied with the machine follow instructions below; also make sure the machine is not in direct sunlight. - Place the Notebook driver CD in the CD DriveWhy does the cooling fan only work sometimes?
- The CPU cooling fan assembly is equipped with temperature sensor and will start to run only if the CPU temperature rises above 60oC and will automatically turn-off if the temperature drops below 60oCMy Quaddra XS seems to run very slow when booting and in windows, what can I do?
- If your machine seems to operate slower than it use to, it is recommended that you run Scan Disk and Defrag mentation from System tools- Click Start in windows and left click on Programs
- Select Accessories and System tools
- If running Scan Disk select Scan disk and choose the appropriate drive
- Place a Dot next to thorough and a tick next to Automatically fix errors and click start
- If you want to run defrag mentation that rearranges files on the hard drive to minimise loss of disk place
- Follow the instructions below:
- Click Start in Windows and left click Programs
- Select Accessories and then System Tools
- Chose Defrag mentation and Select drive ( C ) "Physical Drive" and click Ok
- After windows have finished defragging the drive restart the machine
What PCMCIA cards have been tested with the Quaddra XS?
- See our approval list on the main support page
My Mail LED keeps flashing even after recieving my mail, what should I do?
- This is a problem with the older version of AutoMail. Download the new version and instructions on the download page.